D-Link DPE-301GI PoE adapter Fast Ethernet, Gigabit Ethernet

Bestseller
7658059
219 AED
Inc. D&T
Color:White
Fast delivery from Germany via DHL
Transit times 10-15 business days
Shipping 25 AED for orders under 400 AED

Properties

General characteristics

Power over Ethernet (PoE)
Y
LED indicators
Y
Ethernet LAN (RJ-45) ports
2
DC-in jack
Y
Amount of ports
Amount of ports:
Network ports
RJ-45
Network standards
Power over Ethernet
Medium
WLAN
Transmission rate
1 Gbps
Rack mounting
N
Certification
CE, FCC, VCCI, RCM
Ethernet interface type
Fast Ethernet,Gigabit Ethernet
Wireless technologie
Wireless
Networking standards
IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u
Transmission mode
Full duplex
network protocol
TCP/IP
Other product features (i.e. waterproof, volume control, ...)
Unmanaged
Rack height units
3 U
Product code
DPE-301GI
AC adapter input voltage
100 - 240
Number of products included
1
Storage relative humidity (H-H)
5 - 95
Operating temperature (T-T)
0 - 50, 32 - 122
Model designation
DPE-301GI
Measurements
109.8 x 62.2 x 24.5 mm
Pallet gross length
1200
Operating relative humidity (H-H)
5 - 95
Ethernet LAN data rates
10,100,1000
Package height
68
Storage temperature (T-T)
-30 - 70
AC adapter frequency
50/60
Package width
153
Pallet gross width
1100
Package depth
213
Package weight
398
Products per shipping (inner) case
10
Output current
0.6
Pallet height (sea)
1940
Shipping (inner) case height
360
Products per pallet (air)
600
Shipping (inner) case width
233
Dimensions (WxDxH)
109.8 x 62.2 x 24.5
Master (outer) cases per pallet (air)
60
Master (outer) cases per pallet (sea)
60
Shipping (inner) case length
326
Shipping (inner) case net weight
4100
Pallet gross weight (air)
297800
Pallet height (air)
1940
Pallet gross weight (sea)
297800
Products per pallet (sea)
600
Shipping (inner) case gross weight
4630
EAN
0790069416668

Details

Weight
0.4 kg

Material & care

Color
White

Specifications

Number of pieces
10er
Type
Access Point
Output power
32.4

Description

- Facilitates deployment of PoE devices where power outlets are not available
- Reduces installation and network equipment costs by eliminating the need for electrical wiring
- Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones
- Lightweight, compact and easy to install
- Supports 802.3af / 802.3at
- 10/100/1000 interface provides flexibility for all types of connections

D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.

The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.

The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.

Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router. The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it’s typically placed near the switch/router.

Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.

Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers.

PoE Injector and PoE Splitter Tandem
Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

THIS PRODUCT IS IN EUROPE, TO BE SHIP HERE IN THE UAE